Bok,
evo ono mi je prvi post tu..
jel se može na mikrotiku konfigurirati symetric nat??
ako da, na koji način? jel to uporaba netmap-a? il se jednostavno stave jednaki src. port i to-port ??
malo me zbunjuje to..
znači naredba u stilu:
/ip firewall nat
add chain=dstnat action=netmap dst-address=10.160.250.62 to-addresses=192.168.1.6
add chain=srcnat action=netmap src-address=192.168.1.6 to-addresses=10.160.250.62
ili ovak:
/ip firewall nat
add chain=dstnat action=dst-nat in-interface=ether3 protocol=udp src-port=5060 to-addresses=192.168.1.6
add chain=dstnat action=dst-nat dst-address=10.160.250.62 dst-port=5080 protocol=udp to-addresses=192.168.1.6 to-ports=5080
add chain=dstnat action=dst-nat dst-address=10.160.250.62 dst-port=5070 protocol=udp to-addresses=192.168.1.6 to-ports=5070
add chain=srcnat action=src-nat protocol=udp src-address=192.168.1.6 src-port=5060 to-addresses=10.160.250.62 to-ports=5060
add chain=srcnat action=src-nat protocol=udp src-address=192.168.1.6 src-port=5070 to-addresses=10.160.250.62 to-ports=5070
add chain=srcnat action=src-nat protocol=udp src-address=192.168.1.6 src-port=5080 to-addresses=10.160.250.62 to-ports=5080
nek me neko prosvijetli..
hvala..
